|
|
|
National Stock Number:
5340-01-510-6329
Federal Supply Class:
5340
National Item Identification Number:
015106329
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 858K10003-27 | 31218 | AMI INDUSTRIES, INC |
|
Techincal Specification:
| CENTER SECTION WIDTH | 6.700 INCHES NOMINAL | | CENTER SECTION HEIGHT | 1.160 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.040 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.625 INCHES NOMINAL | | FIRST LEG ANGLE | 106.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.970 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.197 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | FIRST LEG WIDTH | 6.080 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.040 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4130 | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND LEG ANGLE | 74.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.142 INCHES MINIMUM AND 0.150 INCHES MAXIMUM | | SECOND LEG LENGTH | 0.370 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CUT OUT | | SECOND LEG THICKNESS | 0.040 INCHES NOMINAL | | SECOND LEG WIDTH | 6.080 INCHES NOMINAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM |
|
|