|
|
|
National Stock Number:
5340-01-554-9041
Federal Supply Class:
5340
National Item Identification Number:
015549041
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 11453475 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| CENTER SECTION WIDTH | 0.063 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG STYLE | SQUARE | | FIRST LEG WIDTH | 0.750 INCHES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | FIRST LEG LENGTH | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,5052-H34 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM | | OVERALL LENGTH | 1.810 INCHES NOMINAL | | SPECIAL FEATURES | CHEMICAL FILM IAW MIL-C-5541, 1A OR CLASS 3. IDEMTIFY IAW MIL-STD-130. REMOVE BURRS AND BREAK SHARP EDGES. | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG LENGTH | 1.000 INCHES NOMINAL | | SECOND LEG WIDTH | 0.750 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLAS1A OR CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|