|
|
|
National Stock Number:
5340-01-559-6876
Federal Supply Class:
5340
National Item Identification Number:
015596876
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 7497084 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER SECTION THICKNESS | 0.025 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.790 INCHES NOMINAL | | FIRST LEG CORNER RADIUS | 0.130 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.200 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.156 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.220 INCHES NOMINAL | | FIRST LEG STYLE | CORNER RADIUS | | FIRST LEG THICKNESS | 0.025 INCHES NOMINAL | | FIRST LEG WIDTH | 0.790 INCHES NOMINAL | | FIRST LEG LENGTH | 0.500 INCHES NOMINAL | | FIRST LEG OFFSET ANGLE | 40.0 DEGREES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | 301 SPRING TEMPERED STAINLESS STEEL ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | RETAINER,PROBE | | SECOND LEG END RADIUS | 0.130 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG LENGTH | 0.180 INCHES NOMINAL | | SECOND LEG STYLE | CORNER RADIUS | | SECOND LEG THICKNESS | 0.025 INCHES NOMINAL | | STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
|
|