|
|
|
National Stock Number:
5340-12-346-1728
Federal Supply Class:
5340
National Item Identification Number:
123461728
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 462-204600.037 | D1785 | HENSCHEL WEHRTECHNIK GMBH | | 9892080 | D1785 | HENSCHEL WEHRTECHNIK GMBH |
|
Techincal Specification:
| CENTER SECTION THICKNESS | 6,0 MILLIMETERS NOMINAL | | CENTER SECTION WIDTH | 20,0 MILLIMETERS NOMINAL | | CENTER SECTION HEIGHT | 44,0 MILLIMETERS NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 20,0 MILLIMETERS NOMINAL | | FIRST LEG ANGLE | 102,0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 10,0 MILLIMETERS NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT | | FIRST LEG THICKNESS | 6,0 MILLIMETERS NOMINAL | | FIRST LEG WIDTH | 20,0 MILLIMETERS NOMINAL | | FIRST LEG LENGTH | 46,5 MILLIMETERS NOMINAL | | FIRST LEG SLOT LENGTH | 20,0 MILLIMETERS NOMINAL | | FIRST LEG SLOT WIDTH | 10,0 MILLIMETERS NOMINAL | | FIRST LEG STYLE | SQUARE | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN17100 FED STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1.0114 | | MOUNTING HOLE TYPE | THREADED | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 23,0 MILLIMETERS NOMINAL | | SECOND LEG ANGLE | 90,0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 5,0 MILLIMETERS NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 27,5 MILLIMETERS NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 10,0 MILLIMETERS NOMINAL | | SECOND LEG LENGTH | 85,0 MILLIMETERS NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 6,0 MILLIMETERS NOMINAL | | SECOND LEG WIDTH | 20,0 MILLIMETERS NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT | PAINT |
|
|