| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.252 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG WIDTH | 2.850 INCHES MINIMUM AND 2.870 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | S154 NATIONAL SPEC SINGLE MATERIAL RESPONSE OR S156 NATIONAL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAW PLATE-AFT |
| SECOND LEG END WIDTH | 1.890 INCHES MINIMUM AND 1.910 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG THICKNESS | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.040 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.850 INCHES MINIMUM AND 2.870 INCHES MAXIMUM |
| SPECIAL FEATURES | 2ND LEG W/2 HOLES 6.5MM DIA AND 1 HOLE 6MM DIA;LH |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DEF STAN 03-19 NATIONAL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |