| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.087 INCHES MINIMUM AND 0.093 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| CRITICALITY CODE JUSTIFICATION | AHLK |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.073 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.087 INCHES MINIMUM AND 0.093 INCHES MAXIMUM |
| FIRST LEG ANGLE | 89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM |
| FIRST LEG LENGTH | 0.310 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.0469 INCHES MINIMUM AND 0.0473 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | BS 2874 PB102 CONDITION M NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | COPPER ALLOY |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.121 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.242 INCHES MINIMUM AND 0.248 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 2.60 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 0.585 INCHES MINIMUM AND 0.595 INCHES MAXIMUM |