| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 1.238 INCHES MINIMUM AND 1.298 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| FIRST LEG ANGLE | 88.0 DEGREES MINIMUM AND 90.0 DEGREES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.232 INCHES MINIMUM AND 1.292 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.060 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.520 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.283 INCHES MINIMUM AND 0.298 INCHES MAXIMUM |
| FIRST LEG WIDTH | 3.960 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.043 INCHES MINIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MSRR6565EMX MFR REF SINGLE MATERIAL RESPONSE OR MSRR6565ENZ MFR REF SINGLE MATERIAL RESPONSE OR BS S525 EJT NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR BS S524 EKK NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG THICKNESS | 0.043 INCHES MINIMUM |
| SECOND LEG LENGTH | 1.325 INCHES NOMINAL |
| SPECIAL FEATURES | 2ND END W/TWO 0.22IN.DIA HOLES AND ONE 0.32IN.DIA HOLE |
| STYLE DESIGNATOR | ANGLE |