| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.270 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.270 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| FIRST LEG ANGLE | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.370 INCHES MINIMUM AND 1.430 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.755 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.283 INCHES MINIMUM AND 0.298 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.970 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.040 INCHES MINIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | BS S524 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR BS S525 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR MSRR 6565 MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL CORROSION RESISTING |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG END WIDTH | 0.700 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.315 INCHES MINIMUM AND 0.329 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG THICKNESS | 0.040 INCHES MINIMUM |
| SECOND LEG LENGTH | 0.975 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |