| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.292 INCHES NOMINAL |
| FIRST LEG ANGLE | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
| FIRST LEG LENGTH | 0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.120 INCHES NOMINAL |
| FIRST LEG END WIDTH | 1.120 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.232 INCHES MAXIMUM |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG THICKNESS | 0.043 INCHES MINIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MSRR6565EMX MFR REF SINGLE MATERIAL RESPONSE OR MSRR6565ENZ MFR REF SINGLE MATERIAL RESPONSE OR BS S525 EJT NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR BS S524 EKK NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 1.232 INCHES MINIMUM AND 1.292 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.238 INCHES MINIMUM AND 1.298 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 0.283 INCHES MINIMUM AND 0.298 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG THICKNESS | 0.043 INCHES MINIMUM |
| SECOND LEG LENGTH | 1.050 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |