| FIRST LEG THICKNESS | 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | BS S524 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR BS S525 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR MSRR 6565 MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.2830 INCHES MINIMUM AND 0.2980 INCHES MAXIMUM |
| SECOND LEG END RADIUS | 0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| SECOND LEG STYLE | END RADIUS AND TAPERED |
| SECOND LEG THICKNESS | 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.530 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.596 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| FIRST LEG ANGLE | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
| FIRST LEG CORNER RADIUS | 0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.006 INCHES MINIMUM AND 1.066 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.700 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.2830 INCHES MINIMUM AND 0.2980 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.596 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |