|
|
|
National Stock Number:
5365-00-234-5405
Federal Supply Class:
5365
National Item Identification Number:
002345405
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 2584168 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 2584168 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| APERTURE DIAMETER | 10.062 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 10.750 INCHES NOMINAL | | BOLT HOLE QUANTITY | 12 | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 0.404 INCHES MINIMUM AND 0.414 INCHES MAXIMUM | | LAMINATION QUANTITY | 45 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.562 INCHES NOMINAL | | OVERALL WIDTH | 11.854 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-318 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-561 FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 1100 | | OUTSIDE CORNER INVERTED RADIUS | 0.125 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | SIDE RADIUS FROM GASKET CENTER | 5.750 INCHES NOMINAL |
|
|