|
|
|
National Stock Number:
5365-00-241-6450
Federal Supply Class:
5365
National Item Identification Number:
002416450
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 125356-5 | 30640 | ROGERS K Y INC | | 89025-506-5 | 94756 | THE BOEING COMPANY |
|
Techincal Specification:
| APERTURE LENGTH | 0.620 INCHES MINIMUM AND 0.624 INCHES MAXIMUM | | APERTURE WIDTH | 0.309 INCHES MINIMUM AND 0.313 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.952 INCHES MINIMUM AND 0.960 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.990 INCHES MINIMUM AND 0.998 INCHES MAXIMUM | | HOLE DIAMETER | 0.144 INCHES MINIMUM AND 0.147 INCHES MAXIMUM | | INSIDE CORNER RADIUS | 0.015 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.173 INCHES MINIMUM AND 0.183 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.153 INCHES MINIMUM AND 0.166 INCHES MAXIMUM | | OVERALL LENGTH | 1.298 INCHES MINIMUM AND 1.328 INCHES MAXIMUM | | OVERALL WIDTH | 1.298 INCHES MINIMUM AND 1.328 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SURFACE TREATMENT | OXIDE |
|
|