|
|
|
National Stock Number:
5365-00-255-8212
Federal Supply Class:
5365
National Item Identification Number:
002558212
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| P7M2 | 01900 | AMERICAN BRIDGE DIV UNITED STATES STEEL CORP |
|
Techincal Specification:
| APERTURE DIAMETER | 47.719 INCHES MINIMUM AND 47.781 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 48.234 INCHES MINIMUM AND 48.266 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 24 | | HOLE DIAMETER | 0.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 304 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | OUTSIDE DIAMETER | 48.719 INCHES MINIMUM AND 48.781 INCHES MAXIMUM | | STYLE DESIGNATOR | CIRCULAR |
|
|