|
|
|
National Stock Number:
5365-00-257-6076
Federal Supply Class:
5365
National Item Identification Number:
002576076
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| CJ67C0428-3 | 00994 | COLUMBUS JACK CORPORATION |
|
Techincal Specification:
| INSIDE DIAMETER | 4.345 INCHES MINIMUM AND 4.347 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE OR SAE 68A ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY | | OUTSIDE DIAMETER | 4.967 INCHES MINIMUM AND 4.971 INCHES MAXIMUM | | OVERALL THICKNESS | 0.550 INCHES MINIMUM AND 0.560 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES RIGHT SIDE | | SURFACE FINISH | 63.0 MICROINCHES LARGEST OUTSIDE DIAMETER | | SURFACE FINISH | 63.0 MICROINCHES BORE | | SURFACE FINISH | 63.0 MICROINCHES LEFT SIDE |
|
|