|
|
|
National Stock Number:
5365-00-309-0295
Federal Supply Class:
5365
National Item Identification Number:
003090295
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| A630095-1ISSUED | 06840 | BENDIX CORP THE | | A630095-1ISSUED | 06845 | RAYTHEON COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 0.186 INCHES MINIMUM AND 0.192 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.840 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.840 INCHES NOMINAL | | HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.102 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.102 INCHES NOMINAL | | OVERALL LENGTH | 1.124 INCHES MINIMUM AND 1.164 INCHES MAXIMUM | | OVERALL WIDTH | 1.124 INCHES MINIMUM AND 1.164 INCHES MAXIMUM | | MATERIAL | PLASTIC POLYAMIDE (NYLON) | | SPECIAL FEATURES | BOLT HOLES COUNTERBORED 0.375 IN. DIA BY 0.150 IN. DEEP,APERTURE COUNTER BORED 0.620 IN. DIA |
|
|