|
|
|
National Stock Number:
5365-00-309-2905
Federal Supply Class:
5365
National Item Identification Number:
003092905
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 872458-1 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 872458-1 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| CONSTRUCTION | ONE-PIECE | | OVERALL LENGTH | 1.062 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | SLOT QUANTITY | 2 | | SPECIAL FEATURES | THERE ARE TWO SLOTS; THE CENTER OF FIRST SLOT IS LOCATED 0.375 INCH FROM LEFT SIDE,THE SECOND SLOT IS LOCATED 0.437 INCH FROM CENTER OF FIRST SLOT; THE FIRST SLOT HAS A DIAMETER OF 0.218 INCHES WITH A VARATION OF MINUS 0.003 AND PLUS 0.005 INCHES,THE SECOND SLOT HAS A DIAMETER OF 0.171 INCHES WITH VARIATION OF MINUS 0.002 AND A PLUS OF 0.003 INCHES |
|
|