|
|
|
National Stock Number:
5365-00-319-2679
Federal Supply Class:
5365
National Item Identification Number:
003192679
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 161827 | 13002 | GOODRICH CORPORATION | | 161827 | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 161827 | 55284 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.059 INCHES MINIMUM AND 1.065 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 0.164 INCHES MINIMUM AND 0.169 INCHES MAXIMUM | | LAMINATION QUANTITY | 17 | | LAMINATION THICKNESS | 0.003 INCHES MINIMUM AND 0.030 INCHES MAXIMUM | | OVERALL LENGTH | 1.625 INCHES NOMINAL | | OVERALL WIDTH | 0.688 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP 268,COND 1/2 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY 268 | | SPECIAL FEATURES | HOLES LOCATED 0.281 IN. FROM EDGE ALONG W AND 0.438 IN. FROM EDGE ALONG LG |
|
|