|
|
|
National Stock Number:
5365-00-324-7955
Federal Supply Class:
5365
National Item Identification Number:
003247955
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 164B6595P2 | 89954 | BAE SYSTEMS CONTROLS INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.232 INCHES MINIMUM AND 0.240 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | OUTSIDE DIAMETER | 0.367 INCHES MINIMUM AND 0.372 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,TEMPER 1/2 HARD FINISH 2B FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-766,FULL HARD FINISH 2B FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 OR STEEL COMP 301 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|