|
|
|
National Stock Number:
5365-00-332-7161
Federal Supply Class:
5365
National Item Identification Number:
003327161
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 4F73430-105A | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 1 | | HOLE DIAMETER | 0.251 INCHES MINIMUM AND 0.258 INCHES MAXIMUM | | OVERALL LENGTH | 0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM | | OVERALL WIDTH | 0.670 INCHES MINIMUM AND 0.730 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY | | SPECIAL FEATURES | BOLT HOLE HAS COUNTERSINK-90 DEG X 0.344 IN. DIA. MIN. AND 0.344 IN. MAX.; HAS TWO CHAMFERED CORNERS 0.250 IN. X 45 DEG |
|
|