1240-00-344-2614 CELL ASSEMBLY,OPTICAL INSTRUMENT Index 1015-00-344-2620 LOCK

National Stock Number:
5365-00-344-2616

Federal Supply Class:
5365

National Item Identification Number:
003442616

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
841026119204ARMY, UNITED STATES DEPARTMENT OF THE


Techincal Specification:
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH5.2500 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.2500 INCHES NOMINAL
CONSTRUCTIONONE-PIECE
HOLE DIAMETER0.7812 INCHES NOMINAL
OUTSIDE CORNER RADIUS0.1250 INCHES NOMINAL
OVERALL LENGTH4.0000 INCHES NOMINAL
OVERALL WIDTH6.7500 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-22499 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALCOPPER ALLOY 260
STYLE DESIGNATORNON-CIRCULAR W/BOLT HOLES


Click here to Register for Free 30-day Trial