|
|
|
National Stock Number:
5365-00-352-2744
Federal Supply Class:
5365
National Item Identification Number:
003522744
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 1-298585 | 09348 | LUCAS WESTERN INC | | 286355R1 | 29510 | KOMATSU AMERICAN INTL CO | | 286355R1 | 31007 | NAVISTAR INTL CORP | | K22505 | 60038 | THE TIMKEN CORPORATION | | 286355R1 | 92679 | NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ | | K22505 | 96013 | ARTUS CORP | | R-14265-60 | 76727 | NEW ENGLAND TRAWLER EQUIPMENT CO | | R-14265-60 | 98523 | JERED LLC |
|
Techincal Specification:
| APERTURE DIAMETER | 6.280 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 7.500 INCHES NOMINAL | | BOLT HOLE QUANTITY | 6 | | CONSTRUCTION | ONE-PIECE | | FSC APPLICATION DATA | MAIN SHAFT GROUP,CABLE OPERATING POWER CONTROL UNIT,REAR MTG | | HOLE DIAMETER | 0.656 INCHES NOMINAL | | OVERALL WIDTH | 8.400 INCHES NOMINAL | | MATERIAL | COPPER ALLOY | | SIDE RADIUS FROM GASKET CENTER | 3.750 INCHES NOMINAL |
|
|