|
|
|
National Stock Number:
5365-00-353-2579
Federal Supply Class:
5365
National Item Identification Number:
003532579
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 132454 | 29510 | KOMATSU AMERICAN INTL CO | | 2803H138 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | P2289 | 59690 | KOEHRING CO LORAIN DIV | | P2290 | 59690 | KOEHRING CO LORAIN DIV | | 2803H138 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | P2289 | 8E499 | KOEHRING CRANES AND EXCAVATORS INC SUB OF NORTHWEST ENGINEERING CO | | P2290 | 8E499 | KOEHRING CRANES AND EXCAVATORS INC SUB OF NORTHWEST ENGINEERING CO |
|
Techincal Specification:
| APERTURE DIAMETER | 2.313 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.750 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.750 INCHES NOMINAL | | CONSTRUCTION | ONE-PIECE | | FSC APPLICATION DATA | BRACKET,STEERING KNUCKLE,TRUCK | | HOLE DIAMETER | 0.531 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.500 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.500 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 3.750 INCHES MINIMUM AND 3.781 INCHES MAXIMUM | | OVERALL WIDTH | 3.750 INCHES NOMINAL | | MATERIAL | STEEL |
|
|