|
|
|
National Stock Number:
5365-00-384-7323
Federal Supply Class:
5365
National Item Identification Number:
003847323
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 549564 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | MILS22499 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| APERTURE DIAMETER | 2.453 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 3.369 INCHES MINIMUM AND 3.379 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.369 INCHES MINIMUM AND 3.379 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | DEPARTURE FROM CITED DESIGNATOR | QUDE | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 0.406 INCHES NOMINAL | | LAMINATION QUANTITY | 8 AND 1 | | LAMINATION THICKNESS | 0.003 INCHES MINIMUM AND 0.057 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.500 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.469 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.469 INCHES NOMINAL | | OVERALL LENGTH | 4.312 INCHES NOMINAL | | OVERALL WIDTH | 4.312 INCHES NOMINAL | | MATERIAL | COPPER ALLOY | | NONDEFINITIVE SPEC/STD DATA | 2 COMPOSITION AND 3 TYPE AND 2 CLASS | | SPECIAL FEATURES | CHAMFER ONE ID OF 0.057 IN. THK LAMINATION (1) 0.030 IN. W (2) 45 DEG | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|