|
|
|
National Stock Number:
5365-00-586-5823
Federal Supply Class:
5365
National Item Identification Number:
005865823
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 523961 | 03104 | TELEDYNE BROWN ENGINEERING, INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 2.170 INCHES NOMINAL | | CONSTRUCTION | ONE-PIECE | | OUTSIDE DIAMETER | 2.340 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 2800 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1010 | | SPECIAL FEATURES | 4 TABS EQUALLY SPACED ON 90 DEG RADIUS ON OUTSIDE DIA.,0.140 HEIGHT BY 0.190 WIDTH. TOP AND BOTTOM HAVE 32 MICROINCH FINISH,TOP AND BOTTOM SURF-ACES MUST BE PARALLEL WITHIN .0005 TO-TAL INDICATOR READING |
|
|