|
|
|
National Stock Number:
5365-00-589-2956
Federal Supply Class:
5365
National Item Identification Number:
005892956
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| VS25601-032-1 | 77272 | THE BOEING COMPANY | | VS25601-032-1 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 0.500 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 1.060 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | HOLE DIAMETER | 0.098 INCHES NOMINAL | | OUTSIDE DIAMETER | 1.630 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/13,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | STYLE DESIGNATOR | CIRCULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE OR CHROMATE |
|
|