|
|
|
National Stock Number:
5365-00-612-9375
Federal Supply Class:
5365
National Item Identification Number:
006129375
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| 13110019 | 07797 | ROCKER SOLENOID CO |
|
Techincal Specification:
| INSIDE DIAMETER | 0.589 INCHES MINIMUM AND 0.591 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.638 INCHES MINIMUM AND 0.639 INCHES MAXIMUM | | OVERALL THICKNESS | 0.150 INCHES NOMINAL | | MATERIAL | STEEL COMP 304 | | SURFACE FINISH | 125.0 MICROINCHES BORE | | SURFACE FINISH | 125.0 MICROINCHES LARGEST OUTSIDE DIAMETER | | SURFACE FINISH | 32.0 MICROINCHES LEFT SIDE | | SURFACE FINISH | 32.0 MICROINCHES RIGHT SIDE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|