|
|
|
National Stock Number:
5365-00-620-6705
Federal Supply Class:
5365
National Item Identification Number:
006206705
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 66-1746-1 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.500 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.930 INCHES NOMINAL | | HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 2.850 INCHES NOMINAL | | OVERALL WIDTH | 1.000 INCHES NOMINAL | | MATERIAL | PLASTIC | | OUTSIDE CORNER RADIUS | 0.125 INCHES NOMINAL | | SPECIAL FEATURES | HAS 3 SLOTS CUT INTO THICKNESS OF SPACER W/0.090-0.100 IN. RADIUS; FIRST SLOT IS 0.250 IN. FROM LEFT EDGE TO CENTER OF SLOT,SECOND SLOT IS 0.960 IN. FROM LEFT EDGE TO CENTER OF SLOT,AND THIRD SLOT IS 2.600 IN. FROM LEFT EDGE TO CENTER OF SLOT; TWO OUTER BOLT HOLES ARE COUNTERSUNK 100 DEG | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS |
|
|