|
|
|
National Stock Number:
5365-00-630-2975
Federal Supply Class:
5365
National Item Identification Number:
006302975
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 365486-7 | 59915 | SERVICE & SALES INC | | 365486-7 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 3.660 INCHES MINIMUM AND 3.680 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 6 | | BOLT CIRCLE DIAMETER | 4.250 INCHES NOMINAL | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.016 INCHES NOMINAL | | HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | OVERALL WIDTH | 4.690 INCHES MINIMUM AND 4.750 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | OUTSIDE CORNER INVERTED RADIUS | 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | SIDE RADIUS FROM GASKET CENTER | 2.000 INCHES MINIMUM AND 2.010 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CL 1,TY 2 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM |
|
|