|
|
|
National Stock Number:
5365-00-752-1715
Federal Supply Class:
5365
National Item Identification Number:
007521715
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 2661D5 | 56442 | DIAMOND REO TRUCK CO | | 2803H1412 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | 913823 | 58275 | SASCO INC CANADIAN DIV | | 2803H1412 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC |
|
Techincal Specification:
| APERTURE DIAMETER | 4.781 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 5.750 INCHES NOMINAL | | BOLT HOLE QUANTITY | 6 | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.531 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1015 | | OUTSIDE CORNER INVERTED RADIUS | 0.250 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.625 INCHES NOMINAL | | OVERALL WIDTH | 7.000 INCHES NOMINAL | | SPECIAL FEATURES | ALIGNMENT HOLE 0.250 IN. DIA. AND 2 ALIGHNMENT HOLES 0.406 IN. DIA. 180.0 DEGREES APART | | SIDE RADIUS FROM GASKET CENTER | 3.062 INCHES NOMINAL |
|
|