|
|
|
National Stock Number:
5365-00-791-9860
Federal Supply Class:
5365
National Item Identification Number:
007919860
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 763268 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | FSC APPLICATION DATA | CANOPIES,MOVABLE AIRFRAME STRUCTURAL COMPONENT | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | LARGEST BOLT HOLE DIAMETER | 0.310 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/1 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 1100 | | OVERALL LENGTH | 2.920 INCHES NOMINAL | | OVERALL WIDTH | 0.780 INCHES NOMINAL | | SMALLEST BOLT HOLE DIAMETER | 0.250 INCHES NOMINAL | | SPECIAL FEATURES | 0.920 IN. C TO C BETWEEN FIRST AND SECOND BOLT HOLES; 1.150 IN. C TO C BETWEEN SECOND AND THIRD BOLT HOLES; 0.312 IN. FROM TOP EDGE TO CENTER OF HOLE |
|
|