|
|
|
National Stock Number:
5365-00-854-6568
Federal Supply Class:
5365
National Item Identification Number:
008546568
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 10955894 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| OVERALL LENGTH | 8.843 INCHES NOMINAL | | OVERALL WIDTH | 1.062 INCHES NOMINAL | | MATERIAL | STEEL | | SPECIAL FEATURES | FOUR SLOTS ON ONE SIDE ALONG LG,2.500 IN. CENTER AREA ON SLOTTED SIDE IS RECESSED WITH 0.250 IN. BEVELED EDGES; DISTANCE BETWEEN BEVELED EDGE AND OUTSIDE EDGE IS 3.187 IN.,CENTER TO CENTER DISTANCE BETWEEN END SLOTS IS 7.750 IN.,CENTER TO CENTER DISTANCE BETWEEN FIRST SLOT AND THIRD SLOT IS 5.625 IN.,CENTER TO CENTER DISTANCE BETWEEN FIRST SLOT AND SECOND SLOT IS 2.125IN.,DISTANCE BETWEEN CENTER OF FIRST SLOT TO OUTSIDE EDGE ALONG LG IS 0.531IN. MIN. AND 0.561 IN. MAX.,DISTANCE BETWEEN CENTER OF SLOTS TO OUTSIDE EDGE ALONG WD IS 0.437 IN. | | STYLE DESIGNATOR | RECTANGULAR |
|
|