|
|
|
National Stock Number:
5365-00-955-9709
Federal Supply Class:
5365
National Item Identification Number:
009559709
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 369A5149 | 02731 | MCDONNELL DOUGLAS HELICOPTER CO INC | | 369A5149 | 1KVX4 | MD HELICOPTERS INC |
|
Techincal Specification:
| APERTURE DIAMETER | 3.052 INCHES MINIMUM AND 3.072 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.866 INCHES MINIMUM AND 2.886 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.866 INCHES MINIMUM AND 2.886 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM | | LAMINATION QUANTITY | 2 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM | | OVERALL LENGTH | 3.486 INCHES MINIMUM AND 3.506 INCHES MAXIMUM | | OVERALL WIDTH | 3.486 INCHES MINIMUM AND 3.506 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/1 FED SPEC SINGLE MATERIAL RESPONSE |
|
|