|
|
|
National Stock Number:
5365-00-966-3367
Federal Supply Class:
5365
National Item Identification Number:
009663367
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 2900T39P01 | 24446 | GENERAL ELECTRIC COMPANY | | 2900T39P01 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | LAMINATION QUANTITY | 22 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | OVERALL LENGTH | 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | OVERALL WIDTH | 0.460 INCHES MINIMUM AND 0.480 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5519 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | SPECIAL FEATURES | HOLE 0.196 IN,MIN. 0.206 IN. MAX DIA. LOCATED 0.240 IN. FROM LENGTH EDGE TO HOLE CENTER AND 0.250 IN. FROM WIDTH EDGE TO HOLE CENTER |
|
|