|
|
|
National Stock Number:
5365-01-043-4076
Federal Supply Class:
5365
National Item Identification Number:
010434076
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 146088-1 | 64547 | HONEYWELL INTERNATIONAL, INC | | 146088-1 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 1.510 INCHES MINIMUM AND 1.530 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 1.750 INCHES NOMINAL | | BOLT HOLE QUANTITY | 3 | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.151 INCHES MINIMUM AND 0.157 INCHES MAXIMUM | | OUTSIDE DIAMETER | 2.230 INCHES MINIMUM AND 2.270 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,6061,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | SPECIAL FEATURES | SPLIT 0.549 INCHES MINIMUM AND 0.580 INCHES MAXIMUM WIDE,0.720 INCHES MINIMUM AND 0.740 INCHES MAXIMUM LENGTH. 15 DEGREE BASIC RADIUS FROM CENTER LINE THROUGH FIRST BOLT HOLE AND 45 DEGREE BASIC RADIUS FROM CENTER LINE THROUGH SECOND BOLT HOLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | OXIDE FILM |
|
|