|
|
|
National Stock Number:
5365-01-047-3256
Federal Supply Class:
5365
National Item Identification Number:
010473256
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 8438073 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| OVERALL LENGTH | 2.000 INCHES NOMINAL | | OVERALL WIDTH | 0.625 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY 6061 | | SPECIAL FEATURES | FINISH 7.3.2 OF MIL-STD-171; APPLY ONE COAT OF ZINC CHROMATE PRIMER PERMIL-P-8585 TO ALL SURFACES EXCEPT HOLES AND SURFACES NOTED; APPLY ONE COAT OF PAINT TT-E-5-529 COLOR NO. X-24087(OLIVE DRAB) OF FED-STD-595 TO ALL SURFACES EXCEPT HOLES AND SURFACES NOTED; ALL EXTERIOR CORNERS AND EDGES SHALL BEBROKEN .003 TO .015 UNLESS OTHERWISE SPECIFIED; APPLY CORROSION PREVENTIVE PRIMER,PER MIL-P-8585 TO INSERTS WHEN ASSEMBLING; TAP FOR AND INSTALL INSERTS PER MS33646 AND REMOVE NOTCHED TANGSAFTER INSTALLATION | | STYLE DESIGNATOR | RECTANGULAR |
|
|