|
|
|
National Stock Number:
5365-01-048-1347
Federal Supply Class:
5365
National Item Identification Number:
010481347
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 214-010-424-3 | 31633 | ALINABAL HOLDINGS CORPORATION | | 214-010-424-3 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| APERTURE DIAMETER | 7.800 INCHES MINIMUM AND 7.810 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 16 | | BOLT CIRCLE DIAMETER | 8.375 INCHES NOMINAL | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.060 INCHES MINIMUM AND 0.068 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 0.322 INCHES MINIMUM AND 0.329 INCHES MAXIMUM | | LAMINATION QUANTITY | 31 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | OUTSIDE DIAMETER | 8.990 INCHES MINIMUM AND 9.000 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | SPECIAL FEATURES | 0.901 IN. MIN 1.005 IN. MAX CUT OUT ON PERIPHERY | | STYLE DESIGNATOR | CIRCULAR |
|
|