|
|
|
National Stock Number:
5365-01-049-0407
Federal Supply Class:
5365
National Item Identification Number:
010490407
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 160D414038-13 | 1N108 | B & B PRECISION COMPONENTS INC. | | 160D414038-13 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 160D414038-13 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 160D414038-13 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CONSTRUCTION | ONE-PIECE | | CRITICALITY CODE JUSTIFICATION | FEAT | | OVERALL LENGTH | 5.840 INCHES NOMINAL | | OVERALL THICKNESS | 0.120 INCHES NOMINAL | | OVERALL WIDTH | 1.400 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22499, COMP 3, TYPE I, CLASS 2 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | STYLE DESIGNATOR | RECTANGULAR | | SPECIAL FEATURES | SHAPED LIKE AN HOURGLASS WITH SHARP CORNERS; 4 HOLES 0.190 IN. MIN/0.194 IN. MAX DIA, OUTSIDE EDGE HOLES 0.660 FROM BOTH EDGES, NEXT SET OF HOLES 1.440 FROM OUTSIDE EDGE; CENTER WIDTH IS 0.660, 1.760 IN LENGTH SPACED 2.040 FROM EITHER END |
|
|