|
|
|
National Stock Number:
5365-01-051-9597
Federal Supply Class:
5365
National Item Identification Number:
010519597
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3215178 | 82577 | RAYTHEON COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 0.730 INCHES NOMINAL | | GASKET CENTER TO FLAT DISTANCE | 5.560 INCHES NOMINAL | | GASKET CENTER TO SECOND FLAT DISTANCE | 4.700 INCHES NOMINAL | | OUTSIDE DIAMETER | 13.560 INCHES NOMINAL | | MATERIAL | PLASTIC | | SPECIAL FEATURES | CUTOUT 2.200 IN. WIDE BY 0.320 IN. DEEP AT 0.120 IN. RADIUS AT THE TOP,CUTOUT 0.150 IN. WIDE BY 1.000 IN. DEEP AT THE BOTTOM WITH 0.120 RADIUS ON ONE SIDE |
|
|