|
|
|
National Stock Number:
5365-01-052-2789
Federal Supply Class:
5365
National Item Identification Number:
010522789
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 5365PL0688469 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | P189-6 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 0.545 INCHES MINIMUM AND 0.555 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.867 INCHES MINIMUM AND 0.883 INCHES MAXIMUM | | END RADIUS | 0.325 INCHES NOMINAL | | HOLE DIAMETER | 0.128 INCHES MINIMUM AND 0.138 INCHES MAXIMUM | | OVERALL LENGTH | 1.185 INCHES MINIMUM AND 1.205 INCHES MAXIMUM | | OVERALL WIDTH | 0.635 INCHES MINIMUM AND 0.665 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/4 T3 OR T81 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/11 T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 | | STYLE DESIGNATOR | NON-CIRCULAR W/RADIUS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE AND MIL-+23377 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-5541 CLASS 1A FOR A6061 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE AND PLASTIC POLYAMIDE AND CHROMATE |
|
|