|
|
|
National Stock Number:
5365-01-053-5767
Federal Supply Class:
5365
National Item Identification Number:
010535767
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5365PL0688556 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 709184-1 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 0.812 INCHES MINIMUM AND 0.827 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 1.188 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.184 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | OVERALL WIDTH | 1.586 INCHES MINIMUM AND 1.666 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,COMP 301 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OUTSIDE CORNER RADIUS | 0.199 INCHES MINIMUM AND 0.239 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE |
|
|