|
|
|
National Stock Number:
5365-01-078-2612
Federal Supply Class:
5365
National Item Identification Number:
010782612
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 797-7024-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.404 INCHES MINIMUM AND 0.410 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | OUTSIDE DIAMETER | 0.465 INCHES MINIMUM AND 0.471 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI,TEMPER SPRING ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | SPECIAL FEATURES | THIS PART IS IN THE PRIMARY AIRCRAFT CONTROL SYSTEM ANY INCORRECT PART COULD CAUSE LOSS OF LIFE,ALL DIMENSIONS WITH TOLERANCES INDICATED TO BE TIGHTER THAN BLOCK TOLERANCES MUST BE 100 PERCENT INSPECTED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 580-0025-00,FSCM 13499 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|