|
|
|
National Stock Number:
5365-01-089-9360
Federal Supply Class:
5365
National Item Identification Number:
010899360
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 4041T20P01 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 1.870 INCHES MINIMUM AND 1.890 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 2.320 INCHES NOMINAL | | BOLT HOLE QUANTITY | 3 | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | NONSEPARABLE | | HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM | | LAMINATION QUANTITY | 2 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5519 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | OUTSIDE CORNER RADIUS | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | OVERALL WIDTH | 0.268 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | SIDE RADIUS FROM BOLT CIRCLE | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
|
|