|
|
|
National Stock Number:
5365-01-122-2106
Federal Supply Class:
5365
National Item Identification Number:
011222106
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3170032-1 | 2N935 | BOEING DISTRIBUTION SERVICES X, INC. | | 3170032-1 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3170032-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.165 INCHES MINIMUM AND 0.167 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 1.120 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | HOLE DIAMETER | 0.0375 INCHES MINIMUM AND 0.0390 INCHES MAXIMUM | | MATERIAL | STEEL COMP 321 OR STEEL COMP 347 | | OUTSIDE DIAMETER | 1.359 INCHES MINIMUM AND 1.361 INCHES MAXIMUM | | SPECIAL FEATURES | HOLES COUNTERSUNK TO 88.0 MIN 92.0 MAX DEG 0.070 IN. MIN 0.080 IN. MAX DIA | | STYLE DESIGNATOR | CIRCULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | EMS 52 484,FSCM 991943 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMIUM |
|
|