|
|
|
National Stock Number:
5365-01-123-5826
Federal Supply Class:
5365
National Item Identification Number:
011235826
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 606175-2 | 70210 | HONEYWELL INTERNATIONAL INC. | | 606175-2 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 2.700 INCHES MINIMUM AND 2.720 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 3.130 INCHES NOMINAL | | BOLT HOLE QUANTITY | 6 | | HOLE DIAMETER | 0.143 INCHES MINIMUM AND 0.149 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | OUTSIDE DIAMETER | 3.400 INCHES MINIMUM AND 3.420 INCHES MAXIMUM | | SPECIAL FEATURES | COUNTERBORED ONE SIDEDIA 2.855 IN. MIN 2.865 IN. MAX,DEPTH 0.100 IN. MIN0.105 IN. MAX,TWO GROOVES ON OD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|