|
|
|
National Stock Number:
5365-01-125-9245
Federal Supply Class:
5365
National Item Identification Number:
011259245
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 10029931-101 | 94580 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE WIDTH | 2.100 INCHES NOMINAL | | APERTURE LENGTH | 2.100 INCHES NOMINAL | | BOLT HOLE QUANTITY | 10 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.850 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.850 INCHES NOMINAL | | HOLE DIAMETER | 0.136 INCHES NOMINAL | | INSIDE CORNER RADIUS | 0.160 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-18177,TY GEE MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.400 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.400 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.110 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.110 INCHES NOMINAL | | OVERALL LENGTH | 2.765 INCHES MINIMUM AND 2.785 INCHES MAXIMUM | | OVERALL WIDTH | 2.765 INCHES MINIMUM AND 2.785 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SPECIAL FEATURES | SPLIT ALONG THE LENGTH 0.330 IN. LG |
|
|