|
|
|
National Stock Number:
5365-01-130-0226
Federal Supply Class:
5365
National Item Identification Number:
011300226
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 176C1877 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.120 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A322 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A331 ASSN STD 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4140 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM | | OVERALL WIDTH | 1.000 INCHES NOMINAL | | SLOT QUANTITY | 1 | | SLOT RADIUS | 0.280 INCHES NOMINAL | | SLOT DEPTH | 0.820 INCHES NOMINAL | | SURFACE TREATMENT | PHOSPHATE |
|
|