|
|
|
National Stock Number:
5365-01-133-1442
Federal Supply Class:
5365
National Item Identification Number:
011331442
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 3025T84P01 | 02653 | BERKSHIRE MANUFACTURED PRODUCTS, INC. | | 3025T84P01 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 1.367 INCHES MINIMUM AND 1.370 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 2.375 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | HOLE DIAMETER | 0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM | | LAMINATION QUANTITY | 31 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5600 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5519 ASSN STD 2ND MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING OR STEEL COMP 301 | | SPECIAL FEATURES | NOTCH ON OUTSIDE EDGE 0.140 INCH MINIMUM AND 0.150 INCH MAXIMUM WIDE,0.910 INCH MINIMUM AND 0.930 MAXIMUM FROM CENTER OF APERTURE AND 18 DEGREES FROM BOLT HOLE CENTER |
|
|