|
|
|
National Stock Number:
5365-01-135-0011
Federal Supply Class:
5365
National Item Identification Number:
011350011
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| 1003445 | 56232 | LOCKHEED MARTIN CORPORATION | | 1857608 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| INSIDE DIAMETER | 0.279 INCHES MINIMUM AND 0.289 INCHES MAXIMUM | | OUTSIDE DIAMETER | 14.750 INCHES NOMINAL | | OVERALL THICKNESS | 0.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/4,T4 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | SPECIAL FEATURES | 12 MTG HOLES EQUALLY SPACED ON 14.000 IN. DIA | | SURFACE FINISH | 250.0 MICROINCHES LEFT SIDE | | SURFACE FINISH | 250.0 MICROINCHES RIGHT SIDE |
|
|