|
|
|
National Stock Number:
5365-01-136-1905
Federal Supply Class:
5365
National Item Identification Number:
011361905
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3M385V6 | 10630 | ANILLO INDUSTRIES LLC | | 3M385V6 | 76301 | THE BOEING COMPANY | | 3M385V6 | 86928 | SEASTROM MANUFACTURING CO INC |
|
Techincal Specification:
| APERTURE DIAMETER | 0.391 INCHES MINIMUM AND 0.398 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.873 INCHES MINIMUM AND 0.877 INCHES MAXIMUM | | HOLE DIAMETER | 0.128 INCHES MINIMUM AND 0.133 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9046,TYPE 3,COMP C MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM ALLOY UNS R56400 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OVERALL LENGTH | 1.405 INCHES MAXIMUM | | OVERALL WIDTH | 0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM | | SPECIAL FEATURES | APERTURE COUNTERBORE DIA 0.625 IN.,2 HOLES COUNTERSUNK 0.196 IN. DIA | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SURFACE TREATMENT | PASSIVATE |
|
|