|
|
|
National Stock Number:
5365-01-145-4761
Federal Supply Class:
5365
National Item Identification Number:
011454761
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 2640-682-05 ITEM 46 | 96169 | ELECTRIC BOAT CORPORATION | | 2640-682-06 ITEM 46 | 96169 | ELECTRIC BOAT CORPORATION | | 845-4558709 ITEM 46 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 845-4687720 ITEM 46 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 4687720-0046 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| OVERALL LENGTH | 4.500 INCHES NOMINAL | | OVERALL WIDTH | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1018 | | SPECIAL FEATURES | ONE HOLE LOCATED 0.380 IN. IN FROM LEFT END WITH 0.380 IN. DIA,RIGHT END HAS 2 CHAMFERED CORNERS 15 DEGREE ANGLE 0.250 IN. LONG FROM END |
|
|